If you want to use WPA (AES) - Wi-Fi Protected Access 2
(AES) HEX (64 characters) encryption, follow the
instructions in Configuring WPA2 (AES) HEX (64
characters) security.
Configuring WEP 64bit ASCII (5 characters) security
The example set in this section is for 64bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 64-bit setting.
3. From the Key Format drop-down list, select ASCII (5
characters) setting.
4. Type the Key Setting.
5. Click Finished.
6. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
Configuring WEP 64bit Hex (10 characters) security
The example set in this section is for 64bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 64-bit setting.
3. From the Key Format drop-down list, select Hex (10
characters) setting.
4. Type the Key Setting.
5. Click Finished.
85