Allow Listed - LevelOne WGR-8031 User Manual

Allow Listed

If you choose 'Allowed Listed', only those clients whose wireless
MAC addresses are in the access control list will be able to
connect to your Access Point.
1. From the Wireless Access Control Mode drop-down list,
select Allowed Listed setting.
2. Enter the MAC Address.
3. Enter the Comment.
4. Click Save & Apply button.
5. Click OK button.
6. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
7. The MAC Address that you created has been added in the
Current Access Control List.
102