Configuring WEP 128bit ASCII (13 characters) security
The example set in this section is for 128bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 128-bit setting.
3. From the Key Format drop-down list, select ASCII (13
characters) setting.
4. Type the Key Setting.
5. Click Next>>.
Configuring WEP 128bit Hex (26 characters) security
The example set in this section is for 128bit encryption.
6. From the Encryption drop-down list, select WEP setting.
7. From the Key Length drop-down list, select 128-bit setting.
8. From the Key Format drop-down list, select Hex (26
characters) setting.
9. Type the Key Setting.
10. Click Next>>.
76