6. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
Configuring WEP 128bit Hex (26 characters) security
The example set in this section is for 128bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 128-bit setting.
3. From the Key Format drop-down list, select Hex (26
characters) setting.
4. Type the Key Setting.
5. Click Finished.
6. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
87