Arming Schedule Setting > Defocus - i3 International Ax47DC User Manual

Arming Schedule Setting > DEFOCUS
Defocus compares the sharpness of consecutive video frames.
Defocus events can trigger a video clip or snapshot recording to the micro SD card. On-
screen display and email notifications are also available.
Note: All linked actions configured in this setup tab are subject to arming schedule.
• Enable: Check to Enable Defocus.
Store to SD Card:
• Snapshot: Check to save a *.jpg snapshot to the micro SD after each Defocus
event.
• Record: Check to save a *.mp4 video clip to the micro SD after each Defocus
event.
On Screen Display:
On Screen Display feature will display entered text on the video screen whenever
Defocus event is detected.
• Enable: Check to enable On Screen Display text when Defocus event is detected
by the camera.
• Text: Enter the text that will be displayed at the time of Defocus event detection.
The OSD text settings are configured under Communication setup tab (See Section
6.10 for more information).
Condition Settings for Sending
E-mail by DEFOCUS:
Note: SMTP settings must be
configured for this feature.
• Enable: Check to Enable
scheduled E-mail after each
Defocus Event. Snapshot
image will be added to the
email. Note that at least
one MJPEG stream must be
enabled for this function in
Video setup tab.
• Subject: Enter the E-mail
subject.
• Message: Enter E-mail body
message.
Schedule:
• Configure arming schedule
for Defocus events. Enable days of the week when Defocus event detection will
be active (enabled). Set the active time period for each enabled day by using the
drop-down menus for Start and End Times to select the hours and minutes,
respectively. By default, Defocus event detection is set to stay active 24/7.
i3-TRNG-CAMS-Ax47DC-UM.indd 39 Rev. 170322