Opening A Web Client; Figure 2-5 Batch Mode Screen; Figure 2-6 Batch Upgrade Dialog Box - Honeywell H2W2PRV3 Software Configuration Manual

Performance Series IP Camera Software Configuration Guide

Figure 2-5 Batch Mode Screen

3. On the Batch Upgrade screen, click Open, navigate to the directory that contains the firmware file,
and then click OK.

Figure 2-6 Batch Upgrade Dialog Box

When the upgrade is complete, the devices will reboot. While a device is rebooting, the message
"Device is offline: [device IP address]" appears.

Opening a Web Client

You can configure individual camera settings using the web client. To open the web client from
ConfigTool, click the device that you want to open a web client for, and then, in the Operate column,
click the Microsoft Internet Explorer icon. The web client opens in your browser.
10