Ddns; Figure 5-13 Ddns Configuration Interface; Figure 5-14 Using Honeywell Ddns To Configure Ddns; Table 5-10 Ddns Configurations - Honeywell H2W2PRV3 Software Configuration Manual

DDNS

Manually Configuring the DDNS

Figure 5-13 DDNS Configuration Interface

To set the DDNS, go to the corresponding service website to apply a domain name, and then access the
system through that domain. This works even if your IP address has changed.

Table 5-10 DDNS Configurations

Parameter
Server Type
Server Address
Domain Name
Username
Password
Update Period
Using Honeywell DDNS to Configure DDNS

Figure 5-14 Using Honeywell DDNS to Configure DDNS

Set the DDNS to connect the Honeywell DDNS server so that you can access the system through the
servers.
Function
To enable DDNS, select the check box and choose a server from the drop-down
list.
The DDNS server IP address.
Your self-defined domain name.
The user name you enter to log into the server.
The password you enter to log into the server.
The frequency at which the camera regularly sends out the life signal (heartbeat)
to the server. You can set the interval value between the camera and the DDNS
server here.
Configuring Camera Settings
35