Table 6-4 Alarm Configurations - Honeywell H2W2PRV3 Software Configuration Manual

Performance Series IP Camera Software Configuration Guide

Table 6-4 Alarm Configurations

Type
Alarm Type
Operation
Alarm Tone
62
Parameter Function
Motion Detection System alarms when a motion detection event occurs.
System alarms when the camera has been tampered
Tampering
with.
System alarms when the disk (microSD card) is full.
Note This function is only supported by the following models:
Disk Full
H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/
HEW4PR2/H4W2PRV2/ H4W4PRV2.
System records alarm information when a microSD card
error occurs.
Disk Error
Note This function is only supported by the following models:
H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/
HEW4PR2/H4W2PRV2/H4W4PRV2.
System alarms when someone attempts to illegally
Illegal Access
access the camera.
Prompt System displays an alarm dialog box.
When an alarm occurs, the system automatically generates
Play Alarm Tone an audible sound. You can select a tone from your PC for the
alarm tone prompt.
Tone Path Select the alarm sound file.