Restoring Default Settings; Figure 5-37 Add Group Interface; Figure 5-38 Modify Group Interface; Figure 5-39 Default Interface - Honeywell H2W2PRV3 Software Configuration Manual

Configuring Camera Settings

Figure 5-37 Add Group Interface

Click Modifying a Group to edit the remark and/or the rights assigned to the group. Click Save to save
the new settings.

Figure 5-38 Modify Group Interface

Restoring Default Settings

Click Default to restore the camera to its factory default settings.

Figure 5-39 Default Interface

Note The system cannot reset some information, such as the network IP address.
51