Qos; Certificate; Figure 5-22 Qos Configuration Interface; Figure 5-23 Certificate Configuration Interface - Honeywell H2W2PRV3 Software Configuration Manual

Performance Series IP Camera Software Configuration Guide

QoS

Quality of Service (QoS) is a network security mechanism. It fixes problems with network delays and jams.
For network service, the quality of service includes the transmission bandwidth, delay, and packet loss,
for example. Through QoS, you can guarantee the transmission bandwidth, reduce the delay, reduce the
loss of data packets, and enhance the transmission quality with packet prioritization.

Figure 5-22 QoS Configuration Interface

Table 5-16 QoS Configurations

Parameter
Realtime Monitor
Command

Certificate

The camera uses HTTPS, a secure communication protocol that verifies the identities of visited websites
and servers and encrypts data exchanged between the client and the server. When you log in to the
camera's web client for the first time, some browsers may display a warning that the connection is not
private/secure. To access the web client, you must install a Honeywell-signed security certificate.
The installation of the security certificate involves three sets of steps:
• Logging in (and, if applicable, configuring a security exception)
• Downloading the root certificate
• Installing the root certificate
For more details, refer to Performance Series IP Cameras Certification Installation Guide.

Figure 5-23 Certificate Configuration Interface

42
Function
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.