Table of Contents
Advertisement
Performance Series IP Camera Software Configuration Guide
Parameter
Area
Record
Record Delay
Send Email
Snapshot
Configuring the Working Period
Figure 6-2 Configuring the Working Period
Configuring the Motion Detection Area
Figure 6-3 Configuring the Motion Detection Area
56
Function
Configure the motion detection region, its sensitivity, and area. The default settings
covers the entire area. Click Save to enable these settings. See
Motion Detection Area
on page 56.
When Record is enabled, you can trigger motion detection to activate recording.
The system can delay recording for a specified time after the alarm has ended.
Choose a delay period from 10s to 300s.
When this function is enabled, the system sends an email alert when an alarm
occurs.
Select the check box to enable the system to back up motion detection snapshot
files. (See
Path
on page
44
saved.)
for information about configuring where snapshots are
Configuring the
Hide quick links:
Advertisement
Table of Contents
