Related Manuals for Honeywell NTSC
Summary of Contents for Honeywell NTSC
-
Page 1: User Guide
Performance Series Indoor Day/Night H.264 IP Dome Camera NTSC / PAL HD45IP HD45IPX HD44IP HD44IPX User Guide Document 800-09312V2 – Rev A – 08/2012... - Page 3 User Guide...
- Page 4 Issue Date Revisions 06/2011 New document. 07/2011 Added frame rate priority to Table 4-4; added Installing the Honeywell IP Utility Software with Windows 7. V1 Rev A 08/2011 Corrected storage temperature in the specifications. 08/2012 Updated the minimum system requirements. Updated the VMD configuration section.
-
Page 5: Table Of Contents
About the Honeywell IP Utility ........29... - Page 6 Contents Uninstalling IP Utility, Bonjour or the ActiveX Plug-in Software ..... . 43 Uninstalling IP Utility Using the Start Menu ......43 Uninstalling IP Utility or IP ActiveX Using the Control Panel .
- Page 7 Figure 3-1 Honeywell IP Utility Log On Window ......34 Figure 3-2 Honeywell IP Utility User Interface.
- Page 8 Figures...
- Page 9 Indoor Fixed Mini Dome Network Camera Model Numbers ....15 Table 3-1 User Profiles for Honeywell IP Utility and the Web Client ....31 Table 3-2 PC Minimum System Requirements .
- Page 10 Tables...
-
Page 11: About This Document
Performance Series Indoor Day/Night H.264 IP Camera User Guide About This Document This document introduces the Honeywell Performance Series Indoor Day/Night H.264 IP Dome Camera (HD44IP/HD44IPX and HD45IP/HD45IPX). It covers how to install and operate your camera in a network environment. -
Page 12: Cautions And Warnings
Cautions and Warnings THIS SYMBOL INDICATES CAUTION THAT DANGEROUS VOLTAGE RISK OF CONSTITUTING A RISK OF ELECTRIC SHOCK ELECTRIC SHOCK IS DO NOT OPEN PRESENT WITHIN THE UNIT. CAUTION: TO REDUCE THE RISK OF THIS SYMBOL INDICATES ELECTRIC SHOCK, DO NOT REMOVE THAT IMPORTANT OPERATING THE COVER. -
Page 13: Manufacturer's Declaration Of Conformance
Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service at 1.800.796.CCTV for assistance or to request a Return Merchandise... - Page 14 Be sure to have the model number, serial number, and the nature of the problem available for the technical service representative. Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may be refused.
-
Page 15: Introduction
Introduction The Honeywell Performance Series Indoor Day/Night H.264 IP Dome Cameras (“the camera(s)”) provide high quality video surveillance over a network connection. See Table 1-1 for descriptions of the camera models. Table 1-1 Indoor Fixed Mini Dome Network Camera Model Numbers... - Page 16 Introduction...
-
Page 17: Installation And Setup
• Download the latest software updates for your camera. Go to Honeywell download center, www.honeywellsystems.com/support/download-center/index.html, and follow the instructions on the page to logon, find your camera, and then download the latest software updates. -
Page 18: Equipment Required
Installation and Setup Equipment Required The following tools might help you to complete the installation: • Drill • Screwdrivers • Wire cutters Overview of Installation Procedure Note Please familiarize yourself with the installation procedure and complete each step in the exact sequence given. The initial installation of your camera consists of the following steps: Step See …... -
Page 19: Camera Components And Functions
Performance Series Indoor Day/Night H.264 IP Camera User Guide Camera Components and Functions Your camera consists of a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the risk of tampering. Figure 2-1 Performance Series Indoor Day/Night IP Camera Components Cover plate Skirt Base... -
Page 20: Camera Installation
Installation and Setup Camera Installation Preparing the Camera Rotate the dome bubble counterclockwise Skirt until it disconnects. Pull the turret to remove it. Rotate the camera counterclockwise until it disconnects from the skirt. Camera Set aside the dome bubble, turret, and camera. -
Page 21: Connecting The Wiring
Performance Series Indoor Day/Night H.264 IP Camera User Guide Note Other fasteners (preferably stainless steel) can be used, provided they are not larger than the screw holes on the mounting template. Connecting the Wiring Caution Installation must be performed by a qualified electrician. The power wire gauge for the distance and the number of cameras must be determined to maintain 24 V AC at each camera. -
Page 22: Figure 2-3 Camera And Cables
Installation and Setup Connect to the power supply (see Figure 2-3 page 22). Locate the two-pin green connector that was shipped with your camera and make the necessary connections. Plug the power supply into an appropriate power source. The LED on the RJ45 jack illuminates when the camera receives power. -
Page 23: Figure 2-4 Wiring Connection Shown On Board
Performance Series Indoor Day/Night H.264 IP Camera User Guide Figure 2-4 Wiring Connection Shown on Board Factory reset button Local video out connector (for aim and focus) Inside view of camera RJ45 Ethernet Connector (see Connecting to a Network with an RJ-45 Ethernet Connector page for more information). -
Page 24: Mounting The Camera
Installation and Setup Note You can connect your camera to a network or use any type of CAT5 cable to connect it directly to a PC or laptop. Mounting the Camera Surface Mount Skirt Secure the skirt to the ceiling (using appropriate screws, not supplied) or to the Screws wall using the supplied screws. -
Page 25: Figure 2-5 Gimbal Adjustment
Performance Series Indoor Day/Night H.264 IP Camera User Guide Note Please wait approximately 60 seconds after connecting to a power source for video to appear on the local video output. Connect the supplied BNC video cable to the local video out connector to view the video signal on a standard monitor (see Figure 2-5 below to connect a local video... -
Page 26: Adjusting The Lens Focus
Installation and Setup Adjusting the Lens Focus Lenses are pre-focused at the factory. They might require a final adjustment after installation because the optical effect of the dome bubble might cause a slight defocusing of the lens. TECH TIP! To check the focus, hold the dome bubble over the lens while making any adjustments (see Figure 2-6). -
Page 27: Securing The Enclosure Cover
Performance Series Indoor Day/Night H.264 IP Camera User Guide Securing the Enclosure Cover Install the dome bubble when you have set up your camera and completed the network connections (see Chapter 4, IP Camera Web Client). Place the enclosure cover on the camera with the tabs to the left of the slots, then turn it clockwise until the tabs click securely into place (see Figure 2-7). - Page 28 Installation and Setup...
-
Page 29: Installing The Honeywell Ip Utility And Web Client
About the Honeywell IP Utility and Web Client About the Honeywell IP Utility The Honeywell IP Utility is a software application that is installed from a DVD or downloaded from the Honeywell Systems Group download center web site (www.honeywellsystems.com/support/download-center/index.html). It is installed on a local workstation and primarily used by Administrators to configure the cameras residing on a network. -
Page 30: About The Web Client
• Configure video analytics settings. • Configure compression settings. User Profiles: Honeywell IP Utility and Web Client Both the Honeywell IP Utility and the web client have two user types: Administrator and Guest as described in Table 3-1. Note Up to four (4) Administrators and/or guest users can log on at the same time. -
Page 31: Step 1: Confirm Your System Requirements
Contact the network administrator if there are any questions regarding the local area network (LAN) or any other network related issues. Install the Honeywell IP Utility on a workstation with the minimum requirements (outlined in Table 3-2). After the IP Utility is installed, the same computer workstation can be used to access the web client. -
Page 32: Step 2: Install The Honeywell Ip Utility Software
Installing the Honeywell IP Utility and Web Client Table 3-2 PC Minimum System Requirements Component Requirement Operating Windows XP SP3 System Windows 2003 Server R2 32-bit Windows 2008 Server 32/64-bit and R2 64-bit Windows XP SP3 Windows 2003 Server R2 32-bit... -
Page 33: Accessing The Performance Series Installation Guides
Select the applicable PDF to open and view. Installing the Honeywell IP Utility Software with Windows 7 Before installing the Honeywell IP Utility on a computer that runs on Windows 7, you should confirm that the following conditions have been met: Enable Microsoft .NET Framework 3.5 on Your Workstation... -
Page 34: Step 3: Log Onto The Ip Utility And Discover Network Devices
Double-click the Honeywell IP Utility icon on your desktop. - or - Click Start Programs Honeywell Video Systems EQUIP Series IP Utility Honeywell IP Utility. The Honeywell IP Utility Log On window opens. Figure 3-1 Honeywell IP Utility Log On Window Select Administrator or Guest from the User Name drop-down list. - Page 35 Performance Series Indoor Day/Night H.264 IP Camera User Guide Click the arrow button The Honeywell IP Utility program searches for devices on the network and opens to the Honeywell IP Utility user interface. Automatically discover or manually refresh the list of devices on the network.
-
Page 36: Figure 3-2 Honeywell Ip Utility User Interface
Installing the Honeywell IP Utility and Web Client Figure 3-2 Honeywell IP Utility User Interface Refresh button Connect button Use the Product Filter drop-down menu to select a specific device, Disconnect button Limited/No connectivity such as all HD45IP cameras. button The About menu displays the software version installed. -
Page 37: Step 4: Connect To A Device And Configure Network Settings
Performance Series Indoor Day/Night H.264 IP Camera User Guide Step 4: Connect to a Device and Configure Network Settings When you log on to the IP Utility, the devices on the network—including the devices on other subnets—are automatically discovered and are listed in the Discovery pane. After the initial discovery, auto-refresh continues to discover devices that are newly added to the network. -
Page 38: Configuring The Ip Network Settings Automatically Or Manually
Device Name By default, the device name is the device model plus the MAC Address. Honeywell recommends, for security, that you change the device name. MAC Address The MAC address is a factory-assigned address that is unique for each device. -
Page 39: Figure 3-3 Set The Ip Network Settings Automatically Or Manually
Performance Series Indoor Day/Night H.264 IP Camera User Guide Figure 3-3 Set the IP Network Settings Automatically or Manually Click to clear this checkbox to manually set the network details Document 800-09312V2 Rev A 08/2012... - Page 40 Installing the Honeywell IP Utility and Web Client Updating IP Network Settings Automatically In the Discovery pane, select the device and click Connect ( From the System tab click the Obtain an IP Address automatically check box. Enter a Device Name, for example, FrontLobbyDome01.
-
Page 41: Interfacing With The Camera Through A Network Video Recorder
It is important to click Apply in order to save any configuration change. Log onto the web client. There are two ways to launch the web client and log on— with the Honeywell IP Utility program or directly from Internet Explorer. Honeywell IP Utility Log onto the Honeywell IP Utility program. -
Page 42: Figure 3-4 Activex Prompt
ActiveX installed, you are prompted to upgrade to Honeywell secure ActiveX control. Figure 3-4 ActiveX Prompt Click Yes. Follow the InstallShield Wizard prompts to install the secure Honeywell IP ActiveX on your PC. The InstallShield Wizard Completed message indicates a successful ActiveX upgrade. Click Finish. -
Page 43: Uninstalling Ip Utility, Bonjour Or The Activex Plug-In Software
The Honeywell IP Utility is uninstalled. During the uninstallation process, you are prompted to also uninstall the Bonjour program. Click Yes to remove Bonjour or No to only uninstall the Honeywell IP Utility. Click Finish. Uninstalling IP Utility or IP ActiveX Using the Control Panel Click Start ... - Page 44 Installing the Honeywell IP Utility and Web Client...
-
Page 45: Ip Camera Web Client
IP Camera Web Client Before you launch the Honeywell IP web client, ensure that you complete the following sections before configuring your camera: • Chapter 2, Installation and Setup • Chapter 3, Installing the Honeywell IP Utility and Web Client This chapter covers: •... -
Page 46: User Profiles
Note The web page where you log on to the Honeywell IP Utility and any IP device web page (for example, the IP web client) look very similar. You can tell the difference between the two sites by the IP address in the web browser as well as the program name in the lower left corner of the window. -
Page 47: Figure 4-1 Launching The Web Client From The Ip Utility
• The default Guest password is guest. Click The Honeywell IP Utility program searches for devices on the network and opens to the Honeywell IP Utility user interface. In the Discovery pane, double-click the device you want to connect to. -
Page 48: Logging Onto The Web Client From Internet Explorer
IP Camera Web Client Logging Onto the Web Client from Internet Explorer From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the Address bar to open the logon window. The web client log on page opens. Figure 4-2 Web Client Log On Select a User Name and enter a Password. -
Page 49: Navigating The Web-Client User Interface
Performance Series Indoor Day/Night H.264 IP Camera User Guide Navigating the Web-Client User Interface Figure 4-3 Web Client Window Layout: Administrator Log On The URL corresponds to the IP Address as Click Logout to exit the program. configured in the IP Utility. Confirm the user type logged in. -
Page 50: Figure 4-4 Web Client: Administrator User
IP Camera Web Client Figure 4-4 Web Client: Administrator User The menu bar displays which user is logged on Click to select the and provides a link to log video stream. out of the application. Click a Tab to display the corresponding view. -
Page 51: Live View
The SnapShot function ( ) allows you to save an image from Live View to a default folder on your computer (C:\Program Files\Honeywell Video Systems\Support\Snapshots). Files are saved as: DeviceName_Date_Time.bmp. You are not asked for confirmation. SnapShot is available to Administrators and Users with administrator and guest privileges. -
Page 52: Configuring Ip And Firmware Settings
Depending on the hardware installation, there is a tab called either Device Information or Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information available in the Honeywell IP Utility. It provides read-only network settings, firmware settings, and video formats without having to access the IP Utility. -
Page 53: Compression Settings
GOP (number of frames) Figure 4-7 Compressions Settings Tab: Primary Stream Your camera supports simultaneous video streams. The Primary stream delivers H.264 compressed video in real time 30/25 fps (NTSC/PAL) at: • 1280 x 720 resolution (720p resolution for HD45IP/HD45IPX cameras). •... -
Page 54: Video Codec Settings Tab
Set the Target Bit Rate Set the Maximum Bit Rate (kbps) Set the GOP (Group of Pictures) Default settings shown for NTSC models Default settings shown for NTSC models Configuring the Compression Settings On the Compression Settings tab, in the Statistics area, select the Received check box to receive in real time the bit rate and frame rates for the current image. -
Page 55: Table 4-4 Video Streaming Resolutions For Hd45Ip
Options Description Frame Rate 1–30 (NTSC) The frame rate that is displayed per second. For NTSC, select from 1 fps (lowest) to 30 fps (highest). For PAL, select from 1 fps (lowest) to 25 fps (highest). 1–25 (PAL) Priority Quality, Bit Rate Allows you to set the maximum bit rate and/or target rate value, based on priority mode settings. -
Page 56: Statistics: Received Bit Rate And Frame Rate
IP Camera Web Client Figure 4-9 Video Codec Settings Set the Resolution for NTSC or PAL video signals. Statistics are received for the current image in real time when Received is enabled. Click Apply. Adjustments in your compression settings are captured in the statistics. -
Page 57: Camera Setup
Performance Series Indoor Day/Night H.264 IP Camera User Guide Camera Setup The Camera Setup view provides access to the settings used to configure the camera for both Primary and Secondary streams. The following section explains Auto Exposure and White Balance setup. Note You must click Apply after you make changes to any settings to save those changes. -
Page 58: Table 4-6 Auto Exposure Settings
IP Camera Web Client Table 4-6 Auto Exposure Settings Setting Options Description ELC (Electronic Level 1–25 Electronic shutter control. Select ELC when using a manual iris lens. Adjust the Light ELC level to the appropriate value so that the image is well exposed (neither too Compensation) bright nor too dark). -
Page 59: White Balance
Performance Series Indoor Day/Night H.264 IP Camera User Guide White Balance White Balance ensures that color integrity is maintained in the camera image by compensating for the temperature color “casts” that different light sources can cause. Use Table 4-7 to set up White Balance options. Note You must click Apply after you make changes to any settings to save those changes. -
Page 60: Sabotage Detection
IP Camera Web Client Figure 4-11 Video Analytics Tab Each Tamper Detection Setting provides 3 threshold levels: High (80%), Medium (50%) and Low (30%). Each setting has three threshold levels: high (80%), medium (50%) and low (30%). When these thresholds are exceeded, camera sabotage or motion is detected, and alarm messages appear above the video display and alarm signals are sent to DVRs/NVRs (see Figure 4-13). -
Page 61: Table 4-8 Blur Threshold Values
Performance Series Indoor Day/Night H.264 IP Camera User Guide Configuring Video Blur Detection The video appears blurred when the camera is exposed to elements such as water. When this occurs, video blurring in the field of view is detected and an alarm message appears (see Figure 4-13) above the video display. -
Page 62: Table 4-9 Blinding Threshold Values
IP Camera Web Client In the Blinding Threshold list, select one of the following options: Table 4-9 Blinding Threshold Values Value To detect … High (80%) Maximum blinding. The alarm message appears when your camera is blinded by 80% or more. Medium (50%) Medium blinding. -
Page 63: Configuring Video Motion Detection
Performance Series Indoor Day/Night H.264 IP Camera User Guide Note To turn off camera field of view change detection, select Disable in the Scene Change Threshold list. Disable is the default value. Note You must click Apply after you make changes to any settings to save those changes. - Page 64 IP Camera Web Client Note To disable a zone, click the VMD drop-down menu, then select Disable. Fine Tuning Video Motion Detection For best results, the VMD configuration has to be adjusted to match the camera field of view, regions of interest and other factors. Identify areas in the image where motion detection alarms should be triggered.
- Page 65 Performance Series Indoor Day/Night H.264 IP Camera User Guide Increasing VMD sensitivity If relevant scene motion does not trigger VMD alarms, the following adjustments will increase VMD sensitivity: • Decreasing the sensitivity level from 80% to 50%, or from 50% to 30%. This change will cause smaller objects to trigger alarms and it will also require smaller contrast level to report and alarm.
-
Page 66: Figure 4-15 Video Motion Detection Configuration - 30% Sensitivity Level
IP Camera Web Client Figure 4-15 Video Motion Detection Configuration - 30% Sensitivity Level Figure 4-16 Video Motion Detection Configuration - 50% Sensitivity Level... -
Page 67: Figure 4-17 Video Motion Detection Configuration - 80% Sensitivity Level
Performance Series Indoor Day/Night H.264 IP Camera User Guide Figure 4-17 Video Motion Detection Configuration - 80% Sensitivity Level Wide Field of View For cameras with a wide-angle field of view covering a larger scene, people who walk far away from the camera might appear rather small in the image. If motion needs to be detected in the entire field of view, the following region-of-interest box configuration is recommended: •... - Page 68 IP Camera Web Client...
-
Page 69: Appendix A Surface Mounting Template
Surface Mounting Template HD45IP/HD45IPXHD44IP/HD44IPX Cameras Surface Mounting Template Apply to a clean, dry surface, free of dust and dirt 6 Holes Use recommended drill bit as per screws (supplied) Document 800-09312V2 Rev A 08/2012... - Page 70 Surface Mounting Template...
-
Page 71: Appendix B Troubleshooting
Troubleshooting Technical Support Prior to calling Honeywell technical support, refer to the following topics for possible solutions to problems with your camera. To contact the Honeywell Video Systems technical support team, call 1-800-796-2288 (North America only) or send an e-mail to HVSsupport@honeywell.com. -
Page 72: Problem: Live View Does Not Display The Expected Video
Problem: Live View Does Not Display the Expected Video Possible solutions: • Ensure that your web browser settings have been configured to allow ActiveX controls (see Installing the Honeywell IP Utility and Web Client on page for information on setting up your browser). •... -
Page 73: Appendix C Specifications
Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/4” CMOS Number of Pixels (H x V): 1280 x 720 (HD45IP/HD45IPX) - Page 74 Windows 7 (32/64-bit), Windows 2008 Server (32/64-bit) and Windows 2008 R2 (64-bit) Internet Explorer 6,7, 8, or 9 Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at www.honeywellsystems.com/support/...
-
Page 75: Figure C-1 Camera Side View With Dimensions
Performance Series Indoor Day/Night H.264 IP Camera User Guide Figure C-1 Camera Side View with Dimensions 4.9” (125.1 mm) Figure C-2 Camera Bottom View with Dimensions 2.88” (73.10 mm) 4.9” (125.1 mm) Document 800-09312V2 Rev A 08/2012... - Page 76 Specifications...
-
Page 77: Appendix D Glossary
AC frequency of the lighting. The flickerless setting changes the camera shutter speed to a value that will not cause flicker (1/100 sec, NTSC, 1/120 sec for PAL). The side effect is that the camera sensitivity is reduced because the electronic iris feature has effectively been turned off and will no longer control the optimum exposure setting for available light conditions. - Page 78 Glossary NTSC (National Television Standards Committee) A standard of specifications for television transmission in the U.S., Canada, Japan, Central America, and half of South America. The North American system uses interlaced scans and 525 horizontal lines per frame at 30 frames per second.
-
Page 79: Index
Performance Series Indoor Day/Night H.264 IP Camera User Guide Index DayToNight detect time ActiveX control flickerless administrator password, default administrator privileges NightToDay AGC (automatic gain control) CAT5 Ethernet connector ALC (automatic light compensation) cautions 12, APIPA address 38, 40, compliance auto components, camera configuration, IP network... - Page 80 IP web client upgrading launching the IP Utility flickerless lens adjustment frame rate lens focus, adjusting NTSC and PAL limited/no connectivity button 36, setting 53, line lock, adjusting viewing statistics live view tab layout functions, camera log off from the IP web client...
- Page 81 Performance Series Indoor Day/Night H.264 IP Camera User Guide video resolution 54, target bit rate, setting password, defaults technical support picture quality 54, template, mounting power, connecting thresholds, video analytics priority troubleshooting priority order, quality or bit rate processor profiles, user uninstalling, software update user manuals updates, software...
- Page 84 Document 800-09312V2 – Rev A – 08/2012 © 2012 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof.