Upgrading the Firmware
Launching the Web-Client Application
Document 800-00250 Rev C
08/08
To Upgrade the Firmware of the Network Camera
1.
Check
www.honeywellvideo.com/support/downloads/downloads_cam.html
your camera in the list. Click the firmware link to download the file.
2.
In the Discovery pane, select the device to upgrade and click
Figure 3-6
IP Utility Firmware Upgrade
3.
Click Upgrade Firmware. Follow the upgrade wizard steps to complete the upgrade.
4.
Click OK when the upgrade is complete. The device is rebooted. It takes about 3
minutes to complete the upgrade process.
Note
The network camera rebooting after the upgrade will result in a temporary
loss of connection with the camera.
You can open individual Web-Client applications for each discovered device from the IP
Utility. To launch the Web-Client application:
1.
From the Discovery pane, select the device you want to launch and click
2.
From the System tab, click Launch Browser. The Web-Client application of the
selected network camera opens in Internet Explorer.
Note
To enable or disable the HTTP server, select or clear the Enable HTTP
Server check box. By default, the check box is enabled.
3.
Select the user name and enter the password to log on to the application.
Note
You can also launch the Web-Client application by opening your web browser
and enter the URL (network camera IP address) in the Address bar.
EQUIP Series IP Camera Reference Guide
and find
.
.
29