Zoom And Focus; Figure 5-3 Motorized Zoom And Focus; Table 5-2 Zoom And Focus - Honeywell H2W2PRV3 Software Configuration Manual

Performance Series IP Camera Software Configuration Guide

Zoom and Focus

This section only applies to HBW2PR2/HBW4PR2/HEW2PR2/HEW4PR2/
Note
H4W2PRV2/H4W4PRV2 motorized focus/zoom cameras.

Figure 5-3 Motorized Zoom and Focus

Table 5-2 Zoom and Focus

Parameter
Zoom
Focus
Auto Focus
Restore All
Refresh
26
Function
Adjust the focal length of the lens by clicking "+" to zoom in or "–" to zoom out.
Changing the Speed setting adjusts the length of a single-click increment.
Note After adjusting zoom, the lens will focus automatically.
Adjust the definition of the image by clicking "+" to focus far or "–" to focus near.
Changing the Speed setting adjusts the length of a single-click increment.
Click to adjust the focus automatically.
Click to reset the lens to 0 position.
Note Reset the lens periodically if you are making a lot of zoom and focus
adjustments.
Click to refresh the video image.