Safety Instructions - iSocket 3G User Manual

iSocket ® 3G

2. Safety Instructions

This appliance complies with accepted technological standards with regard to safety. Nevertheless, as
manufacturers we consider it our obligation to make you aware of the following safety information. To
ensure years of trouble-free enjoyment, and to maintain your guarantee, please note the following.
 Never carry out repairs yourself! There are no serviceable parts in the device.
 The operating voltage of the appliance and the mains voltage as well as the type of current must
match (see the rating plate on the underside of the appliance).
 Only plug into a correctly installed earthed mains socket.
 Provide easy access for a maintenance or emergency disconnection.
 Do not connect this device to another one similar device.
 The device is not intended for direct plug-in equipment, which are not equipped with a plug.
External equipment that connects to the device must have a cord with appropriate plug.
 Some devices are supplied with their own switch, which needs to be disconnected before they are
unplugged. Do not use this product with such devices - it cannot disable the switch of a remote
device.
 Do not use external equipment with a faulty plug!
Do not connect to appliances which cannot be left unattended (e.g. certain heaters)!
 Do not exceed power load limit and other electrical parameters specified in the technical
characteristics. Check the power of the connected device!
 The device is intended only for domestic private non-commercial use. Do not use in emergency
environments: e.g. military, hospitals etc!
 This product is not designed for safe disconnection of the controlled equipment from power
network; the device is not equipped with a residual-current device (RCD). Make sure that your
home electrical network meets safety standards.
 The product is designed for indoor use in dry area. Do not use it in wet or chemically aggressive
environments! For example, do not use it in the bathroom. It is also not designed for industrial
operation in aggressive environments.
 Do not use this device if the casing is damaged!
 Do not shake or drop the product. This could cause damage!
 Keep away from direct sunlight.
 Keep out of reach of children!
 Block access to the management and set-up of the device to unauthorised users
 Read additional safety information in Chapter 17.
iSocket Systems hereby declares that this iSocket 3G complies with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
At the end of the product's useful life, please dispose of it at appropriate collection points
provided in your country.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: reorient or relocate the receiving antenna by reorienting or
relocating the equipment; increase the separation between the equipment and receiver;
connect the equipment into an outlet on a circuit different from that to which the receiver is
connected; consult the dealer or an experienced radio/TV technician for help. Any changes /
modifications not approved by the responsible party could void the user's authority to operate
the equipment. This equipment must be installed to provide a separation distance of at least
20 cm from all persons. The equipment contains transmitter module FCC ID: UDV-
1103022011008 located inside the equipment on the printed circuit board of the modem.
© Copyright iSocket Systems 2017
All rights reserved. Version 1.0.2-EN
- 5 -
www.isocket3g.com
(Chapter 5).
English