Security & Notifications Settings; Security Numbers List Settings - iSocket 3G User Manual

iSocket ® 3G
Would you like to see more features? You are welcome to send us your
5. Security & Notifications Settings
Block access to iSocket management for unauthorised users! If there are no security
settings, then anyone who knows the phone number of the SIM card will be able
to manage the device and deplete the card's credit - which is not advisable! The
device uses two methods of protection against unauthorised access:
 Only allowing access to authorised phone numbers
 Authentication by password
Both methods can be used separately or together. In the first method the device ignores
SMS-commands and calls from numbers that are not listed. The list can contain up to 10
numbers. The second method involves the use of individual 5-characters password. This
password must be typed before the SMS-commands without any space or special
characters as shown here:
passwordCOMMAND
command PASSWORD=12abc (more details below).

5.1 Security Numbers List Settings

The security list allows you to configure up to 10 numbers and up to 17 digits for one
phone number. By default, the security list is disabled and does not contain any numbers.
The first number can be added in a simple way by executing command MAKEMEBOSS -
see introduction to this feature in the "Quick Start" (Chapter 3, Step 3). However all the
next numbers must be added using the command ADDSECNUM, described in the table
below, because all the next numbers from which you try to execute the MAKEMEBOSS
command will already be treated as non-authorised.
IMPORTANT NOTE!
format (with country code), without spaces or hyphens. This will ensure safe and reliable
operation. See examples below.
Example of how to add/remove the number to/from the security list:
ADDSECNUM+12125555555 / DELSECNUM+12125555555
Here 1 is the United States country code, 212 is the city code for New York and 5555555
is a 7-digit local number.
For this new iSocket you can add a number with access limited to only Ctrl and Inf
commands. Such a number will not be allowed to configure the device. Add "LIMITED" to
the end of the number for such limitation.
For example: ADDSECNUM+12125555555Limited
Note! If you add a number to the list when the list is not activated, the protection will be
disabled. Do not forget after adding number to activate security list by command
© Copyright iSocket Systems 2017
All rights reserved. Version 1.0.2-EN
feedback: http://isocket.me/feedback
(for example, 12abcSTATUS), where 12abc is a password set by the
We recommend you always add telephone numbers in international
- 11 -
www.isocket3g.com
English