Password Protection; Configuration Of The Numbers For Alerts - iSocket 3G User Manual

iSocket ® 3G
SECLIST=ON. If you deleted all the numbers by command DELSECNUMALL, the protection
will be disabled automatically (SECLIST=OFF became active).
IMPORTANT NOTE!
numbers that the system does not recognise are considered to be unauthorised
numbers.
Below is a list of commands for the security list settings.
Command
MAKEMEBOSS
ADDSECNUMyour_number
ADDSECNUMnumberLIMITED
DELSECNUMyour_number
DELSECNUMALL
SECNUMBERS
SECLIST=ON
SECLIST=OFF
SECLIST?
We suggest that you always use security list protection, even if you use
NOTE!
password protection. Chapter 6.3 lists more reasons for this.

5.2 Password Protection

The following table shows how to set a password for managing access. The password must
consist of 5 characters. Do not use a simple combination of numbers for a password!
Password 12345, 11111, abcde and other such passwords are not secure! NOTE! Don't
forget to add the old password before the command PASSWORD=x if you are
going to remove password protection or update the password.
Command
PASSWORD=12abc
PASSWORD=NO

5.3 Configuration of the Numbers for Alerts

Before enabling different alerting (Chapter 7.3, 8.1 and 10) you must setup at least one
number for alerts. There are few optional ways to setup this number. One is the feature
"Make me boss!" (see introduction in the "Quick Start", Chapter 3, Step 3 and more in
Chapter 5.1). Another option is the feature "Alert me!" – send the command ALERTME
from the number which you want to be the number for alerts and the system will
© Copyright iSocket Systems 2017
All rights reserved. Version 1.0.2-EN
Make sure that you don't use the "hide my number" option. All
Description
This will add the number from which
you send message to the list and will
enable security list (SECLIST=ON
will be active), also it will add your
number for all types of other alerts
(Chapter 7.3, 8.1 and 10)
Add new number to security list. Use
international format (with country
code) without spaces or hypens – see
examples above.
Add a new number with limited
access. This number will not have
access to configuration commands.
Delete specific number from security
list
Delete all numbers from the list
Request for security list numbers
Activate security list
Disable security list
Information about security list
activation
Description
Set password 12abc
Disable password
- 12 -
www.isocket3g.com
Response
Your phone number
has been assigned for
all types of alerts and
was added to security
list which has been
activated
+12125555555 added
(secnum)
+35895555555 added
(limited secnum)
+12125555555
removed (secnum)
DELSECNUMALL – OK
SECNUMBERs
+12125555555,
35895555555 (limited)
SECLIST=ON – OK
SECLIST=OFF – OK
SECLIST=OFF,(ON)
Response
PASSWORD=***** – OK
PASSWORD=NO – OK
Type
Conf
Conf
Conf
Conf
Inf
Conf
Conf
Inf
Type
Conf
Conf
English