Controls And Indicators; Battery Disconnect Switch - Snorkel S1930E Operator's Manual

Controls and Indicators

The operator shall know the location of each control and
indicator and have a thorough knowledge of the function
and operation of each before attempting to operate the
machine.
1
Figure 2 – Battery Disconnect Switch

1. Battery disconnect switch

4
6
3
Figure 3 – Lower Controls and Indicators
2. Control selector switch
3. Ground operation switch
4. Emergency stop button
5. Platform raise/lower switch
6. Hour meter
7. Tilt/lowering alarm
S1930E/S1932E/S2632E – 1360417
7
2
5
10
9
14
11
15
8
Figure 4 – Upper Controls and Indicators
8. Emergency stop button
9. Drive/lift selector switch
10. Drive range switch – S2632E Only
11. Joystick
12. Interlock switch
13. Steer switch
14. Horn button
15. Platform overload protection light
16. Battery condition indicator – option
Danger
Pinch points may exist between moving components.
Death or serious injury will result from becoming
trapped between components, buildings, structures,
or other obstacles. Make sure all personnel stand
clear while operating the aerial platform.
• Controls to position the platform are located on the
lower control panel on the chassis and on the upper
control panel in the platform.
• Controls to drive the aerial platform are located on the
upper control panel only.
Battery Disconnect Switch
The battery disconnect switch is located at the rear of the
chassis (refer to Figure 2).
The battery disconnect removes electrical power from all
electrically controlled functions when in the off position.
• Place the switch in the on position to electrically con-
nect the battery to the electrical system.
Caution
Only authorized personnel should operate the aerial
platform. Unqualified personnel may cause injury
to coworkers or property damage. Lock the battery
disconnect switch in the off position before leaving
the aerial platform unattended.
Controls and Indicators
16
12
13
7