Memory Groups; Memory Group Assignment - Yaesu FT-891 Advance Manual

Memory Operation

Memory Groups

Memory channels may be arranged into as many as six convenient groups, for easy
identification and selection. For example, different memory groups may be designated
for AM BC stations, short-wave broadcast stations, contest frequencies, repeater
frequencies, PMS limits, or any other groupings you might like.
Each memory group is capable of holding up to 20 memory channels ( except Memory
Group 1 is fixed to19 memory channels).

Memory Group Assignment

1. Press and hold in the [ F ] key for one second
to activate the Menu mode.
2. Rotate the MULTI function knob to select
Menu Mode "05-09 [ MEM GROUP ]" .
3. Press the MULTI function knob, and then
rotate it to set this Menu item to "ENABLE"
(the default setting is "DISABLE").
4. Press the MULTI function knob to save the
new setting.
5. Press the [ F ] key to exit. Operation will now
be restricted to the six Memory Groups.
r To cancel Memory Group operation, repeat steps 1 through 5 above, choosing "DIS-
ABLE" in step 3.
r To avoid confusion, note that the PMS memory group and the PMS memories "P1L"
through "P9U" will be so designated.
Group Number
GROUP 1
GROUP 2
GROUP 3
GROUP 4
GROUP 5
GROUP 6
GROUP 7*
*: USA and UK version only. **: UK Version.
Memory Channel Number
01 - 19
20 - 39
40 - 59
60 - 79
80 - 99
P1L/P1U - P9L/P9U
501 - 510 (501 - 507**)
53 FT-891 Advance Manual