Vl-1000 Linear Amplifier Interconnections - Yaesu FT-891 Advance Manual

VL-1000 Linear Amplifier Interconnections

Be sure that both the FT-891 and VL-1000 are turned off, and then follow the installation
recommendations contained in the illustration.
r Refer to the VL-1000 Operating Manual for details regarding amplifier operation.
r Do not attempt to connect or disconnect coaxial cables when your hands are wet.
r Set the Menu item "16-15 [ TUNER SELECT ]" to "LAMP".
r Since the ALC cable is connected to the REM/ALC jack, the optional FH-2 cannot be
connected.
Coaxial Cable (50Ω)
Connect to "INPUT 1" of the VL-1000
HF/50MHz Antenna
FT-891
CT-58 Band Data Cable (Option)
CT-58 ALC Cable (Option)
111
To link the FT-891 and VL-1000
Power switches, set the VL-1000
REMOTE switch to the "ON" position.
Set the front panel's
INPUT switch to the
"INPUT 1".
FT-891 Advance Manual