Yaesu FT-891 Advance Manual page 14

CW Mode Operation
Checking the CW Memory Contents from the FT-891 Front Control Panel
1. Set the operating mode to CW.
2. Set the "BK-IN" feature to "OFF".
3. Press the [ F ] key to find the "FUNCTION-1"
list screen.
4. Rotate the MULTI function knob to select
"MON".
5. Press the MULTI function knob, the Monitor
level pop-up screen will appear.
6. Rotate the MULTI function knob to set the
Monitor volume level ( 0 - 100 ) .
7. Press the MULTI function knob or the [ F ]
key.
8. Press the [ F ] key to find the "REC SET-
TING" list screen.
NOTE: This screen may be enabled/
disabled via Menu Mode "05-11
[ REC SETTING ] ".
9. Rotate the MULTI function knob to select a memory [ CH1 ] - [ CH5 ] that was previously
recorded.
10. Press the MULTI function knob to hear the CW message played in the sidetone mon-
itor. No RF energy will be transmitted.
11. Press and hold the [ F ] key for one second to exit the "REC SETTING" list screen and
resume normal operation.
14 FT-891 Advance Manual