Yaesu FT-891 Advance Manual page 16

CW Mode Operation
Playback the CW Message On-The-Air using the FT-891 Display Control Panel
1. Set the operating mode to CW.
2. Set the "BK-IN" feature to "ON".
3. Press the [ F ] key to find the "REC SET-
TING" list screen.
NOTE: This screen may be enabled/
disabled via Menu Mode "05-11
[ REC SETTING ] ".
4. Rotate the MULTI function knob to select
a previously recorded CW memory [ CH1 ] -
[ CH5 ] .
5. Press the MULTI function knob, the CW
message programmed in the selected Mem-
ory Register will be transmitted on the air.
6. Press and hold the [ F ] key for one second to exit the "REC SETTING" list screen and
resume normal operation.
Playback the CW Message On-The-Air using the Optional FH-2
1. Set the operating mode to CW.
2. Set the "BK-IN" feature to "ON".
3. Press the FH-2 [ CH1 ] - [ CH5 ] key, depend-
ing on which CW Memory Register mes-
sage you wish to transmit. The programmed
message will be transmitted on the air.
16 FT-891 Advance Manual