Contour Level; Contour Width; If Notch Width; Scp Start Cycle - Yaesu FT-891 Advance Manual

Menu Mode

12-02 CONTOUR LEVEL

Function: Adjusts the GAIN of the CONTOUR circuit.
Available Values: -40 - 0 - 20
Default: -15
Description: Sets level of the attenuation or the gain of the CONTOUR circuit.

12-03 CONTOUR WIDTH

Function: Sets the bandwidth ( "Q" ) of the CONTOUR circuit.
Available Values: 1 - 11
Default: 10
Description: Sets the bandwidth ( WIDTH ) of the CONTOUR circuit.

12-04 IF NOTCH WIDTH

Function: Sets the attenuation bandwidth characteristic of the DSP IF notch filter on the
VFO-A.
Available Values: NARROW/WIDE
Default: WIDE
Description: Selects the attenuation bandwidth characteristic setting of the DSP IF
notch filter to "NARROW" or "WIDE".

13-01 SCP START CYCLE

Function: Selects the sweep interval of the Spectrum Scope feature.
Available Values: OFF/3/5/10 ( sec )
Default: OFF
Description: The scope spectrum is repeatedly swept according the set interval.

13-02 SCP SPAN FREQ

Function: Sets the bandwidth of the spectrum scope sweeping.
Available Values: 37.5/75/150/375/750 ( kHz )
Default: 750kHz
Description: Sets the bandwidth ( SPAN ) of the spectrum scope.
14-01 QUICK DIAL
Function: Setting of the MULTI function knob tuning speed in the SSB, CW, RTTY and
DATA mode.
Available Values: 50/100/500 ( kHz )
Default: 500kHz
14-02 SSB DIAL STEP
Function: Setting of the DIAL knob tuning speed in the SSB mode.
Available Values: 2/5/10 ( Hz )
Default: 10Hz
92 FT-891 Advance Manual