Keyer Type - Yaesu FT-891 Advance Manual

Menu Mode
03-02 DVS TX OUT LVL
Function: Sets the microphone output level for the voice memory.
Available Values: 0 - 100
Default: 50
Description: The microphone output level may be adjusted to the operators own voice
and preference. For example, the output level may be set differently
between the microphone and the voice memory. The higher the setting, the
higher the output level becomes.

04-01 KEYER TYPE

Function: Switches the keyer operation.
Available Values: OFF/BUG/ELEKEY-A/ELEKEY-B/ELEKEY-Y/ACS
Default: ELEKEY-B
Description: Switches the keyer operation.
OFF:
BUG:
ELEKEY-A: A code elements ("Dot" or "Dash") are automatically
ELEKEY-B: Pressing both sides of the paddle transmits the currently
ELEKEY-Y: Pressing both sides of the paddle transmits the currently
ACS:
04-02 KEYER DOT/DASH
Function: Reverses the connections of the CW paddle key jack.
Available Values: NOR/REV
Default: NOR
Description: Reverses the connections of the CW paddle.
NOR: Press the right side of the paddle to transmit the "Dot" signal and
REV: Press the left side of the paddle to transmit the "Dash" signal and
04-03 CW WEIGHT
Function: Adjusts the keyer CW weight.
Available Values: 2.5 - 4.5
Default: 3.0
Description: Sets the "Dot":"Dash" ratio for the built-in electronic keyer.
Disables the keyer function.
Functions as a "BUG key". Only the "Dot" side is automatically
generated ( the "Dash" side is generated manually ) .
transmitted upon pressing either side of the paddle.
generated "Dash" followed by the "Dot" (or reverse order).
generated "Dash" followed by the "Dot" (or reverse order).
While transmitting the "Dash", the first transmitted "Dot" will
not be stored.
Same as "ELEKEY" except that the spacing between
characters is precisely set by the keyer to be the same length
as a dash (three dots in length).
press the left side of the paddle to transmit the "Dash" signal.
press the right side of the paddle to transmit the "Dot" signal.
75 FT-891 Advance Manual