Ota (Over The Air) - Delphi DEA600 Owner's Manual

The re-positioning of the non-selected gauges from the General Settings
screen of the Virtual Gauges app shall be according the following rules:

Gauges in the preceding slots will shift back one position until the
position where the selected gauge was originally is reached.

Gauges in slots after where the selected gauge snaps will remain
unaffected.
Once the user stops pressing the screen, all the gauges will be moved and
the gauge selected keep their new positions.
Only one gauge can be moved at a time in the General Settings screen of
the Virtual Gauges app.
While moving a gauge position in the General Settings screen of the Virtual
Gauges app, if the user moves the gauge to one of the sides of the screen,
the Virtual gauges app will switch to the next/previous page, depending on
the side. In this case, right side is related with the next page and the left side
is related with the previous page.
The page movement when a gauge is moved to a one of the side of the
screen is subject to the following restrictions:

The page switching shall be restricted to the active pages.

If the gauge is moved to the left side of the screen while in the first
page no action shall be performed.

If the gauge is moved to the right side of the screen while in the last
active page no action is performed.
Gauges placement should be adjusted with the vehicle key in the ON
position to ensure that all available gauges are displayed for rearrangement.
Reset to Default Screen
If the Reset to Default Soft key from the General Settings of the Virtual
Gauges app is depressed, the Virtual Gauges app shall restore the gauge
priority list to the Default Virtual Gauges priorities, updating also the position
of the gauges in the Settings Screen and in the Virtual Gauges app.
When short pressed, prior to resetting to the Default Virtual Gauges priorities
the Virtual Gauges app displays the following Pup-up warning. See Figure
80 as reference.
Owner´s Manual DEA600 Radio
Preset 1, Preset 2 and Cancel act as soft keys in the pop-up warning.
Pressing Preset 1 or Preset 2 closes the warning pop-up and the General
Settings screen and restores default Virtual Gauges priorities of the selected
preset as well as updating the position of the gauges in the General Settings
screen and in the Virtual Gauges app.
Pressing Cancel closes the warning pop-up and returns to the General
Settings pop-up menu without changing any configurations.

OTA (Over the Air)

The System is capable of receiving Over the Air updates when the unit is
connected to the internet. Select MobileCare application and it will search for
updates automatically. The following items can be updated:
To check for available updates connect the system to WiFi (see Setting/WiFi
section), then open the MobileCare app from the Home screen, as shown in
Figure 81.
Figure 80: Reset configuration pop-up

CoPilot Truck navigation software and virtual gauges

System Software Updates
41 | P a g e