Radio Sources; Am/Fm - Delphi DEA600 Owner's Manual

navigation system and the Rear Aux is set automatically, if no other source
with higher priority is active (I.E. phone call, video, reverse mute...).
During this Mode, the Radio streams the audio from the Navigation system
on the speakers (Stereo Signal). This operation is available under the
following conditions: With Ignition ON and System ON: the radio shall
change to REAR AUX IN mode.
If the Navigation audio is deactivated, then the radio shall switch to the last
source (if available) if not, the radio shall return to the last tuner mode.

Radio Sources

The System displays the 4 Radio sources into the next to the right
subsequent tab-bar as illustrated on Figure 29:

AM

FM

SiriusXM

WX
Figure 29: Audio App Tuner Sources
There are 7 presets for WX, 12 presets for FM, 12 presets for AM and 18
presets for SXM; 6 presets will be shown on each screen. Additional presets
Owner´s Manual DEA600 Radio
can be viewed by swiping the preset bar. Each preset works as soft key
button selector.
In order to save a station in to a memory:
The System displays the current tuned frequency along with the
corresponding radio Band.
The systems display a specific screen interface for the SiriusXM source.

AM/FM

The System presents the following control soft keys as part of the AM/FM
radio source interface:
To perform SEEK UP function it is necessary to press and release NEXT
soft key on the screen.
To perform SEEK DOWN function it is necessary to press and release
PREVIOUS soft key on the screen.
TUNE UP is performed by pressing and hold NEXT soft key.
TUNE DOWN is performed by pressing and hold PREVIOUS soft key.
The AM/FM radio sources screens follow the distribution and styling
previous Figure 29 illustrates.
WX
The WX band is for Governmental weather radio services frequencies; the
radio can tune 7 weather channels.
The System presents the next control soft keys as part of the WX radio
source interface:

Tune to the desired station.

Press and hold one of the 6 presets.

When the selected station is displayed on the preset, the station
has been saved in the selected preset.

Next

Previous

Scan

Strong Station list

Update List
20 | P a g e