Power Off; Navigation; Rounding - Vaisala HM41 User Manual

Power off

The Power off setting defines how long the device can
remain inactive before powering off automatically. The
time limit options are 10, 30, and 60 minutes. Select
Never to disable automatic power off.
HM40 has no permanent memory for graph data:
when the meter is turned off, the graphs are
cleared. Only tagged points are stored in
permanent memory. To avoid losing graph data
while working, set a suitable delay for the
automatic power off or disable it.

Navigation

Navigation setting affects the behavior of arrow buttons
in the measurement view:
- Normal: Up arrow moves parameter selector left,
down arrow moves it right
- Inverted: Reverses the direction

Rounding

Rounding setting affects the number of decimal places
that are used to show the measurements:
- On: Measured values are rounded to one decimal
place.
- Off: Measured values are shown with two decimal
places.
36