Removing The Solid-State Drive From Bracket; Prerequisites; Procedure - Dell Embedded Box PC5000 Service Manual

Removing the solid-state drive
from bracket
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box
Embedded Box PC, follow the steps in
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the drives from the hard-drive

Procedure

NOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or
both, depending on the configuration ordered.
1 Remove the screw that secures the solid-state drive to the solid-state drive
bracket.
After working inside your Embedded
"Removing the back
cage.
PC. After working inside your
cover".
31