Removing The Drives From The Hard-Drive Cage; Prerequisites; Procedure - Dell Embedded Box PC5000 Service Manual

Removing the drives from the
hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box
Embedded Box PC, follow the steps in
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care when
handling the Solid-state/hard drive.
CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive
while the Embedded Box PC is in sleep or on state.

Prerequisites

Follow step 1 to step 6 in

Procedure

NOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or
both, depending on the configuration ordered.
1 Remove the screws that secure the top drive to the hard-drive cage.
After working inside your Embedded
"Removing the back
PC. After working inside your
cover".
27