Removing The Wwan-Antenna Connectors; Prerequisites; Procedure - Dell Embedded Box PC5000 Service Manual

Removing the WWAN-antenna
connectors
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box
Embedded Box PC, follow the steps in
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the PCI/PCIe card

Procedure

1 Remove the nuts and washers that secure the WWAN-antenna connectors one
and two to the chassis.
64
After working inside your Embedded
"Removing the back
(if installed).
PC. After working inside your
cover".