Bandwidth Cap Setting; Dynamic Dns - Cisco RV345 Administration Manual

WAN
• Connect on Demand — It specifies the connection timers after which the connection is terminated if there is
inactivity. Enter the Max Idle Time, in seconds, to wait before terminating the connection due to inactivity. Default
is 5 minutes.
• Keep Alive — It checks the connection with router periodically, to re-establish the connection when disconnected.
In the Redial Period, enter the time in seconds for the router to check the connection automatically. Default period
is 30 seconds.

Bandwidth Cap Setting

The Bandwidth Cap Tracking limits the transfer of specified amount of data over a period. It is also known
as a band cap or data cap. To configure the Bandwidth Cap Setting, follow these steps:
Step 1 Check Bandwidth Cap Tracking and enter the following:
• Monthly Renewal Date — Select number of days to apply the bandwidth cap settings.
• Monthly Bandwidth Cap — Enter the size of the data.
• Send an email to administrator if 3G/4G usage has reached percentage of monthly bandwidth cap — Select
the percentage of data for monthly bandwidth cap. When the cap is reached, an email alert is sent to the administrator.
Step 2 Click Apply.

Dynamic DNS

Dynamic Domain Name System (DDNS) is a method of keeping a domain name linked to a changing IP
address since not all computers use static IP addresses. D DNS automatically updates a server in the DNS
with the active configuration of its hostnames, addresses, or other information. DDNS assigns a fixed domain
name to a dynamic WAN IP address. Hence, you can host your own web FTP, or another type of TCP/IP
server on your LAN. There are several DDNS services to choose from, most of which are free, or available
at a nominal cost. The most popular is DynDNS.
Bandwidth Cap Setting
RV345/345P Administration Guide
43