User Groups - Cisco RV345 Administration Manual

System Configuration
Preshared-Key
Confirm Preshared-Key
Step 2 Click Apply to save the settings. Click Edit or Delete to edit or delete an existing domain.
The external database priority is always RADIUS/LDAP/AD/Local. If you add the Radius server on the router,
Note
the Web Login Service and other services will use the RADIUS external database to authenticate the user. There
is no option to enable an external database for Web Login Service alone and configure another database for
another service. Once RADIUS is created and enabled on the router, the router will use the RADIUS service
as an external database for Web Login, Site to Site VPN, EzVPN/3rd Party VPN, SSL VPN, PPTP/L2TP VPN,
802.1x.

User Groups

The administrator can create user groups for a collection of users that share the same set of services. Such
user groups can be authorized to access multiple services like Web Login, PPTP, L2TP, and EzVPN.
To create user groups, follow these steps:
Step 1 Select System Configuration > User Groups.
Step 2 Under the User Groups Table, click Add to create a new user group.
Step 3 In the Group Name field, enter a name for the group.
Step 4 Under the Local User Membership List, check the desired check boxes in the Join column to attach the list of users to
the group.
Step 5
Under Services, select the services the user groups should have access to and enter the following information.
Web Login
Site to Site VPN
If you have selected RADIUS as the Authentication Type, enter the preshared-key of the
RADIUS server.
Reenter the preshared-key of the RADIUS server to confirm it.
Specify the web login permissions granted to the users attached to the group:
• Disabled — No member of the user group can login to the Configuration Utility
using a web browser.
• Read Only — The members of the user group can only read the system status
after they login. They cannot edit any settings.
• Administrator — All members of the user group have full privileges to configure
and read the system status.
Check Permit in this group to enable access to a site-to-site VPN policy.
• Click Add to open the Add Feature List pop up.
• Select a profile from the drop down list and click Add.

User Groups

RV345/345P Administration Guide
31