Access Rules - Cisco RV345 Administration Manual

Access Rules

Remote Web Management
Allowed Remote IP Address
SIP ALG (Session Initiation
Protocol Application-layer
gateway)
FTP ALG Port
UPnP (Universal Plug and
Play
Restrict Web Features
Exception
Step 2
In the Trusted Domains Table, check Domain Name to edit the existing domain settings.
Step 3 Click Add, Edit or Delete to add, edit or delete a domain.
Step 4 Click Apply.

Access Rules

To configure the access rules, follow these steps:
Step 1
Select Firewall > Access Rules. In the Access Rules Table, enter the following information:
Step 2 Click Add or select the row and click Edit and enter the following:
Rule Status
Action
RV345/345P Administration Guide
68
Check Enable to enable remote web management and enter the Port (Default 443,
Range 1025-65535).
• Select HTTP or HTTPS.
Check Any IP Address or enter a range of IP addresses for remote access.
Check Enable to allow SIP ALG. This embeds messages of the SIP passing through a
configured device with Network Address Translation (NAT) to be translated and encoded
back to the packet. This application-layer gateway (ALG) is used with NAT to translate
the SIP or Session Description Protocol (SDP) messages.
Enter the port number. The default value is 21. FTP ALG port translates the FTP packets.
Check Enable to enable universal plug and play.
Check to restrict the following web features:
• Java: Blocks Web Java feature.
• Cookies: Blocks cookies.
• ActiveX: Blocks ActiveX.
• Access to HTTP Proxy Server: Blocks HTTP proxy servers.
Check Enable to allow only the selected web features such as Java, Cookies, ActiveX,
or Access to HTTP Proxy Servers and restrict all others.
Check Enable to enable the specific access rule. Uncheck to disable.
Choose Allows or Denies from the drop-down list.
Firewall