Web Filtering - Cisco RV345 Administration Manual

Security

Web Filtering

Web filtering is a feature that allows you to manage access to inappropriate websites. It can screen a client's
web access requests to determine whether to allow or deny that website. To enable and configure web filtering,
follow these steps:
Step 1
Click Security > Web Filtering.
Step 2 On the Web Filtering section, select On or Off and click Apply.
Step 3 In the Web Filtering Policies table, click Add. To edit an existing policy and click Edit to modify it.
Step 4 On the Web Filtering — Add/Edit Policy page, enter the following information:
Policy Name
Description
Enable
Category
Device Type
OS Type
Web Reputation
Applied on IP Group
Exception List
Specify a name for the web filtering policy you are creating.
Enter a short description for the policy.
Check Enable to activate the policy.
• Click Edit and select the desired Filtering Level (select the appropriate web
categories to be filtered). Choose High, Medium, Low or Custom to define the
filtering extent. You can also choose the items from the Adult/Mature Content,
business/Investment, Entertainment, Illegal/Questionable, IT Resources,
Lifestyle/Culture, Other and Security categories. The incoming URL belonging
to the selected items are blocked.
• Click Apply to go back to Web Filtering - Add/Edit Policy page. You can see the
selected web content listed in the Application List Table under Category.
• Click Restore to Default Categories to restore default settings.
Select the device type from the drop down list, to which the policy should be applicable.
Select the OS from the drop down list, to which the policy should be applicable.
Check to enable the web reputation analysis.
Select an IP group from the drop down list to which this policy should be applied.
Click Edit, then Add and define the following:
• White List — Click Add to define the Domain Name or Keyword to bypass this
policy.
• Black List — Click Add to define the Domain Name or Keyword that should be
blocked.
• Exclusion List — Click Add to specify the IP Address that is excluded from this
policy.
Click Apply.

Web Filtering

RV345/345P Administration Guide
99