User Accounts - Cisco RV345 Administration Manual

System Configuration
Email Encryption
Authentication
Send Email to 1
Send Email to 2
From Email Address
Step 3 Click Test Connectivity to Email Server to test connectivity.
Step 4
Click Apply.

User Accounts

You can create, edit, and delete local users and authenticate them using local database for various services
like PPTP, VPN Client, Web GUI login, and SSLVPN. This enables the administrators to control and allow
only the local users access the network.
To create local users and determine the password complexity, follow these steps:
Step 1 Select System Configuration > User Accounts.
Step 2
Under Local Users Password Complexity, check Enable to enable the password complexity.
Step 3 Configure the password complexity settings.
Minimal password length
Minimal number of
character classes
The new password must be
different than the current
one
Step 4 In the Local Users Membership List table, click Add to add a user on the router.
Step 5
In the Add User Account page, enter the following information:
Username
New Password
New Password Confirm
Select None or TLS/SSL as the email encryption method.
Select the type of authentication from the drop-down list: None, Login, Plaintext or
MD5.
Enter an email address to send to.
Enter an email address to send to (optional).
Enter an email address to send from.
Enter the minimum length of the password to create a new password (Range 0 to 64,
Default 8).
Enter the minimum number of character classes that should be used for the new password
(Range 0 to 4, Default 3). Compose a password using three of these four classes:
(Uppercase, letters, lower case letters, numbers or special characters).
Enable to require the user to enter a different password when the current password
expires.
Enter a username.
Enter a password.
Confirm the password.

User Accounts

RV345/345P Administration Guide
29