Rv345/345P Administration Guide - Cisco RV345 Administration Manual

Hide thumbs Also See for RV345:
Table of Contents

Advertisement

LAN
Relay
Configuring DHCP for IPv4
Step 5
Click Next and configure the following:
Client Lease Time
Range Start and Range End
DNS Server
Static DNS 1 and Static
DNS 2
WINS Server
DHCP Options
Configuring DHCP type for IPv6
Step 6
To configure the DHCP Mode for IPv6, enter the following:
Disable
Server
Step 7
Click Next and configure the following:
Client Lease Time
Range Start
Range End
DNS Server
Sends the DHCP requests and replies from another DHCP server through the device.
Enter the remote DHCP server IPv4 address to configure DHCP relay agent.
Amount of time (in minutes) that a network user is allowed to connect to the router with
the current IP address. Valid values are 5 to 43,200 minutes. The default is 1440 minutes
(equal to 24 hours).
The range start and end of IP addresses that can be assigned dynamically. The range
can be up to the maximum number of IP addresses that the server can assign without
overlapping the PPTP and SSL VPN.
DNS service type; where the DNS server IP address is acquired.
Static IP address of a DNS Server. (Optional) If you enter a second DNS server, the
device uses the first DNS server to respond to a request.
Optional IP address of a Windows Internet Naming Service (WINS) server that resolves
NetBIOS names to IP addresses. Default is 0.0.0.0.
• Option 66 — Enter the IP address or the hostname of a single TFTP server.
• Option 150 — Enter the IP addresses of a list of TFTP servers.
• Option 67 — Enter the boot filename.
Disables the DHCP on this device. There are no additional parameters to complete
DHCP server that assigns addresses to clients from their respective pools.
Amount of time that a network user is allowed to connect to the router with the current
IP address. Enter the amount of time in minutes. Valid values are 5 to 43,200 minutes.
Default is 1460 minutes (24 hours). For example, if the router uses the default LAN IP
address, 192.168.1.1, the starting value must be 192.168.1.2 or greater.
Starting address of the IPv6 address pool.
Ending address of the IPv6 address pool.
Type of DNS (server static), proxy, or the DNS server provided by your ISP.
LAN/DHCP Settings

RV345/345P Administration Guide

57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv345pRv340

Table of Contents