Administration; Reboot - Cisco RV345 Administration Manual

Administration

This section describes the device's administration features and contains the following topics:
•
•
•
•
•
•

Reboot

The Reboot allows users to restart the device with active or inactive images.
To access Reboot page, follow these steps:
Step 1
Click Administration >Reboot.
Step 2 In the Active Image after Reboot section, select an option (Active Image x.x.xx.xx or Inactive Image x.x.xx.xx) from
the drop-down list.
Step 3 Select the preferred reboot option.
• Reboot the device.
• Return to factory default settings after reboot.
• Return to factory default settings including certificates after reboot.
Step 4
Click Reboot to reboot device.
Reboot, page 15
File Management, page 16
Diagnostic, page 18
License, page 19
Certificate, page 20
Config Management, page 21
3
C H A P T E R
RV345/345P Administration Guide
15