Email; User Accounts - Cisco RV260 series Administration Manual

Email

Step 1
In the Syslog Servers section, check Enable to enable the syslog server.
Step 2 In the Syslog Server 1 field, enter the IP address of a syslog server to which the log messages are sent.
Step 3
In the Syslog Server 2 field, enter the IP address of a syslog server to which the log messages are sent.
Step 4 Click Apply.
Email
You can configure your device's email server to your specifications.
Configuring Email
To configure the email server, follow these steps.
Step 1 Select System Configuration > Email.
Step 2
Under Email Server, enter the following:
SMTP Server
SMTP Port
Email Encryption
Authentication
Username
Password
Send Email to 1
Send Email to 2
From Email Address
Step 3 Click Apply and Test Connectivity to Email Server to test connectivity.
Step 4
Click Clear to clear the current email settings.
Step 5 Click Apply.

User Accounts

You can create, edit, and delete local users and authenticate them using a local database for various services
like PPTP, VPN Client, and the Web GUI login. This enables the administrators to control and allow only
the local users access the network. You can also configure the web login session timeout.
RV260x Administration Guide
36
Enter the address of the SMTP server.
Enter the SMTP port.
Select None or TLS/SSL as the email encryption method.
Select the type of authentication from the drop-down list: None, Cleartext, MD5 or
Login.
Enter a username.
Enter a password.
Enter an email address to send to.
Enter an email address to send to (optional).
Enter an email address to send from.
System Configuration