Data_Log; Test_Pr - Tescom ER3000 User Manual

profile may then be downloaded into the controller. After profile download, it
may be started by software writing variable ID_PROFILE_STATE, a toggle
switch, or by the UI3000/UI4000. See the Readme.doc in the profile2 directory
for a detailed description of the software.

8.4.5 Data_log

This sample data acquisition program provides basic data collection for the user.
The program can be used to read up any of the ER variables and store the
information into an output file. Data_log.cfg is used to configure the data
collection variables including sample time, number of samples, variables to
collect and output file name. See readme.doc in Data_log directory for more
information.

8.4.6 Test_pr

Test_pr.exe resides in the Debug directory. This program can be used as a
simple test for the user to check for node and serial numbers, version of
software, and communication port. This program should be used as part of the
troubleshooting steps described in Section 10, Troubleshooting.
9. ER3000 Internal Variables 43