Power On/Off Your New Lcd Tv; Power Mode Status - NEC E656 User Manual

Power On/Off Your New LCD TV

Press the power button on the remote control or press the power button
located on the side of the TV. The TV will power on.
Power button

Power Mode Status

When in ON mode, the Monitor operates as follows if no external signal is
input.
Mode
LED Status
1-1. HOME mode is set under Energy Options in the on-screen display
menu.
1-2. When the external device is connected to the VGA terminal, the NO
SIGNAL menu is displayed and 10 seconds later the Monitor switches
to Auto Power save mode.
1-3. In Auto Power save mode at VGA terminal, when the Monitor receives a
signal from an external VGA device, it switches automatically to ON
mode.
NOTE:
Note that in Auto Power save mode at VGA terminal, the Monitor does not
switch automatically to ON mode even if a signal is input from an external
device using HDMI,component video or composite video.
If the power cord is unplugged during Auto Power save mode at VGA
terminal, the Monitor will starts in Auto Standby mode the next time it is
turned on.
or
ON Auto Power save
None Blinking Red
English-19
Auto Standby
Red