Connect To The Power Source; Power On/Off Your New Lcd Display - NEC E322 User Manual

Connect To The Power Source

The display should be installed close to an easily accessible power outlet�
Fully insert the prongs into the power outlet socket� A loose connection may
cause image degradation�
If there is power to the display, the front LED at the bottom of the display will
be either blue or red� A blue LED means the display is powered on� A red LED
means the display is in standby mode�

Power On/Off Your New LCD Display

Press the power key on the remote control or press the power button located
on the side of the display� The display will power on�
Power Key
or
English-13