Download Table of Contents Print this page
NEC NLT-20 Owner's Manual

NEC NLT-20 Owner's Manual

20.1" tft lcd tv/monitor
Hide thumbs Also See for NLT-20:


Owner's Manual
Model :
To reduce the risk of electric shock do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the Active Matrix LCD with anything hard as this may scratch, marked, or
damage the Active Matrix LCD permanently.
- The appliance is not intended for use by young children or infirm persons without
- Young children should be supervised to ensure that they do not play with the
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user's authority to operate this product.
This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as
indicated on the label on the back cover. Use only the AC-DC adaptor supplied with
the set and never apply an AC mains to the set directly. The AC-DC adaptor operates
on an AC mains supply, the voltage is as indicated on the label of the AC-DC
a. Connect the DC plug of the AC-DC adaptor to the 15V socket of the set.
b. Connect the AC-DC adaptor and it's power cord.
c. Connect the power cord to an AC mains.
In the event of thunderstorms or power cuts, please pull out the mains plug of the
AC-DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over the
power cord, and do not place the set where the power cord is subject to damage.


Table of Contents

Summary of Contents for NEC NLT-20

  • Page 1 Owner's Manual NLT-20 Model : Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
  • Page 2: Table Of Contents

    Warnings Service Never remove the back cover of the set as this can expose you to high voltage and other hazards. If the set does not operate properly, unplug it and call NEC service centre. Aerial Connect the aerial cable to the socket marked Ant. on the back. For the best reception an outdoor aerial should be used.
  • Page 3: Supplied Accessories

    LIST UPDATE TIME REVEAL HOLD NS-201 5. Owner’s manual 6. PC IN cable Owner's Manual Model : NLT-20 Controls <<CONTROLLER OF PANEL>> 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. (Programme Up/Down) Selects a programme or a menu item.
  • Page 4: Controls 7~9

    Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the front panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode.
  • Page 5: Basic Operation

    Basic Operation Turning the TV On and Off Standby Setup: The AC-DC converter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the power button on the front panel of the TV to go into standby mode.
  • Page 6: Setting Up Tv Programme

    Setting up TV Programme Once you have preset the programmes, you will be able to Auto programme use the PRxy or NUMBER buttons to scan the System programmes you programmed. Storage from Start Programmes can be tuned using automatic or manual modes.
  • Page 7: Programme Edit

    Setting up TV Programme Programme edit Programme edit This function enables you to delete or skip the stored 1 0 0 0 0 0 programmes. 2 0 0 0 0 0 Also you can move some programmes to other programme numbers or insert a blank programme data into the ■...
  • Page 8: Sound Control

    Sound Control You can select your preferred sound setting; Flat, Music, Sound Movie or Speech and you can also adjust the sound Equalizer frequency of equalizer, balance. If you switch AVL to on, Balance the set automatically keeps on an equal volume level even Surround if you change programmes.
  • Page 9: Programme List

    Other functions Calling the programme list Programme list You can check the programmes stored in the memory by displaying the programme list. 1 0 0 0 0 0 Displaying programme list 2 0 0 0 0 0 1. Press the LIST button to display the Programme list menu.
  • Page 10: Special Teletext Function

    Teletext Special Teletext functions MENU Functions Changes Teletext mode TEXT/MIX ; Only Teletext mode, text mode superimposed on the TV picture, TV mode Selects double height text. Press this button to enlarge the top half of the page. SIZE Press this button again to enlarge the bottom half of the page.
  • Page 11: S-Video Input

    External Equipment Connection A/V OUT 1. Connect the Audio outputs(L, R) of the TV to Audio-IN(L, R) of another displayer or the amplifier system - If you connect the amplifier system, you can also play the TV sound through the stereo amplifier system. 2.
  • Page 12: Product Spec

    This is normal and not an indication of a defect. NS-201 • Technical specifications are subject to change without notice. Model NLT-20 Horizontal size 575(575) mm Thickness 60(160)mm Height 395(450) mm Weight 7.85(9.11) kg...
  • Page 13: Troubleshooting

    84A Richmond Rd, Keswick, 5053 Western Australia Perth 45 Sarich Court, Osbome Park 6017 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Centre NEC Australia Pty. Ltd. Home Electronics Group...
  • Page 14 500-????031104...

Table of Contents