Connecting The Plug-In Connections And Ground Cable - Pfaff 3511-3/01 Instruction Manual

Set-up and Initial Commissioning
8

Connecting the plug-in connections and ground cable

.02
O Insert all plugs on the control box 2 in accordance with their designation.
O Insert the "motor" into the bushing X 1 and the bushing X 2.
O Attach the following ground cables in order to discharge static electricity.
O Securely attach the ground cable from the sewing head 1 to ground point A.
O Securely attach the ground cable from the control point B to ground point B.
O Securely attach the ground cable from the main switch 3 to ground point C.
O Securely attach the ground cable from the stand 4 to ground point D
O Securely attach the ground cable from the motor cable X1 to ground point E
24
B
E
X4
X7
X4/A
X23
2
Fig. 8 - 04
Attention
Plugging in the connector incorrectly can damage the control unit!
X1
X2
X3
X6
X5
1
X0
4
D
D
0
3
C
B
A