Table of Contents
Advertisement
Input
11
Example of a parameter entry
.02.02
O Switch the machine on
O Press the TE key to call up the parameter entry function.
O Select the desired parameter by pressing the +/- keys (P) e.g. parameter "660" (bobbin
O Set the desired value for the parameter by pressing the +/- keys (L), e.g. value "2" (bobbin
O The values of the changed parameters are accepted and sewing mode is called up by
58
The selection of editable parameters depends on the active user level, see chapter
11.02.01 Selecting the user level and chapter 11.02.03 List of parameters.
116a
thread monitoring).
660a
thread monitoring using stitch counting).
660a
The value for the number of stitches for bobbin thread monitoring is entered via
parameter "760.
pressing the TE key.
0
0
2
Advertisement
Table of Contents
