Operating Controls
F2 (setting aid for the edge trimmer)
O The corresponding function is switched on or off by pressing the key.
F3
O After calling up the corresponding "PC" (piece counter) function, the piece counter is
Start inhibitor
O The start inhibitor is switched on or off by pressing the key. The sewing or seam
20
The edge knife moves to the trimming position in manual sewing when the function is
switched on.
reset by pressing this key, see chapter 10.03.03 Switching on the edge trimmer with a
time delay (waistband extension)
sequence cannot be started when the function is switched on.