Sartorius MSA6.6S User Manual page 190

Accessories
Pipette Calibration Hardware and Software
Pipette calibration kit (hardware) for models with 0.1 mg and 0.01 mg readability
Consists of moisture trap and all required adapters
Pipette calibration kit (hardware) for microbalance weighing modules 6.6S and 3.6P
Consists of moisture trap and all required adapters
Pipette Tracker pipette calibration software. Software and user manual in English only.
Pipette Tracker Pro pipette calibration software, for use in regulated areas, networkable and validatable,
according to the 21 CFR Part 11 regulations. Software and user manual in English only.
Documentation basis for validation (IQ, OQ) of Pipette Tracker PRO version.
All documents are in English only.
Filter Weighing and Antistatic Accessories
Antistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0.1 mg or 0.01 mg
Filter weighing pan d 75 mm, for ultramicrobalance or microbalance models
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
Filter weighing pan d 90 mm, for ultramicrobalance or microbalance models
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
Ionization blower to eliminate electrostatic charges on sample containers and samples
Stat-Pen ionization probe for discharging electrostatically charged samples and filters
Special Applications
Density determination kit for solids and liquids for weighing modules with a readability
Density determination kit for solids and liquids for weighing modules with a readability of 1 mg
Q-Grip, flexible holder for weigh-in containers and filters up to 120 mm diameter
(replaces the original weighing pan, for Cubis
Q-Grid grid weighing pan for Cubis
safety weighing cabinets or workbenches (reduced wind attack surface of the weighing pan; replaces the standard
weighing pan)
Weighing Tables
Weighing table made from synthetic stone, with vibration dampening
Wall console
Weighing table made from wood with synthetic stone for precise, reliable measurements
Weighing Accessories
Weighing scoop made from chrome nickel steel , 90 + 32 × 8 mm
Aluminum weighing scoop, 4.5 mg (250 pieces) for ultramicrobalance and microbalance models
Aluminum weighing scoop, 52 mg (50 pieces) for ultramicrobalance and microbalance models
Support arm for 10/100 mg precision weighing modules for raising the control units MSE, MSU, MSA
The brand name and logo for Bluetooth
and trademark by Sartorius is under license. Other brand names and trademarks are the property of their respective owners.
190 Cubis MSA User Manual
®
models with 0.01 and 0.1 mg readability)
®
models with a readability of 10 mg or 100 mg for weighing in laboratory hoods,
®
wireless technology are are the property of Bluetooth SIG Inc. The use of this brand name
< 1 mg
YCP04MS
VF988
YCP04-PT
YCP04-PTPro
YCP04-VTK
YWP01MS
VF2562
VF2880
YIB01-DR
YSTP01
YDK01MS
YDK02MS
YFH01MS
YWP03MS
YWT03
YWT04
YWT09
641214
6565-250
6566-50
YDH01MS