Using The Sleep Timer - Blaupunkt CRP10BK User Manual

CRP10BK
1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until "MEM" appears and "01" flashes. Press SET once to store
Memory 1.
3. Press or
until "MEM" appears and "02" flashes. Press SET once to store Memory 02.
4. Repeat Step 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, press the SET once at a time while the radio is on.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This overrides
the original settings.

USING THE SLEEP TIMER

At RADIO mode, press and hold RADIO/SLEEP to enter the sleep mode. The sleep and the
1.
sleep time "05" (5 minutes) appear on the display.
2. Press the RADIO/SLEEP again as needed to adjust the sleep timer from 5, 10, 15, 30, 45, 60,
75, 90 or OFF.
3. When the display changes back to show the time, press and hold RADIO/SLEEP once to
show the sleep time remaining.
4. The radio will play for the programmed sleep time and then shut o .
5. To turn o the radio before the sleep time has elapsed, press
TO VIEW CELSIUS OR FAHRENHEIT TEMPERATURE READOUT
Simply press /C / F to select degree Celsius or degree Fahrenheit temperature readout (for
both indoor and outdoor temperature readout).
Remarks:
Keep in mind that the display of outdoor temperature will has tolerance in 2 degree
compare with the actual temperature. It will be vary and may not very precisely depending
on the location which the temperature sensor was mounted, actual environment and
transmission signal range.
TO USE THE PROJECTION (operated by adaptor only)
1. Press PROJECT once to turn on the projection.
2. Press PROJECT once again to activate auto scrolling function to view the current outdoor
temperature (rounded to the nearest digit) and the current time for 5 seconds alternately.
Press C / F to select degree Celsius or degree Fahrenheit temperature readout in
projection view.
3. Press PROJECT once again to turn o the proj ection.
When the projection is on, press and hold PROJECT to flip the projection view upside
down. At the back of your unit, use the rotary knob to rotate the projection view by 90
degree.
FROST ALERT
Frost Alert Icon
temperature is between -1°C to 3°C
to select another station you like to memorize. Then press and hold SET
will appear and flash when outdoor
8
once.