Turning Off The Projector; After Use - NEC NP3150 User Manual

Turning off the Projector

To turn off the projector:
1. Press the POWER (ON/STAND BY) button on the projector
cabinet or the POWER OFF button on the remote control.
The [POWER OFF / ARE YOU SURE?] message will appear.
2. Press the ENTER button
W
3. After making sure that the projector is in standby mode, turn
off the Main Power switch. The power indicator will go out.
About Direct Power Off
NOTE: Before using Direct Power Off, be sure to allow at least 20 min-
utes immediately after turning on the projector and starting to display
an image.
CAUTION
TIP: The projector can be unplugged during its cool down period after it is turned off.

After Use

Preparation:
1. Unplug the power cable.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
4. Cover the lens with the lens cap.
POWER
P O
34
3. Projecting an Image (Basic Operation)
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
POWER POWER
OFF ON
COMPUTER
1 2
VIEWER
VIDEO
COMPONENT
3
S-VIDEO NETWORK
USB
LAMP
STATUS
POWER SELECT
POWER POWER
OFF ON
COMPUTER
1 2
VIDEO VIEWER
COMPONENT
3
S-VIDEO NETWORK
USB
LAMP
STATUS
SELECT
POWER