Making Connections; Connecting Your Pc Or Macintosh Computer - NEC NP3150 User Manual

Hide thumbs Also See for NP3150:
Table of Contents

Advertisement

Making Connections

Connecting Your PC or Macintosh Computer

NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode
and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power manage-
ment software.
Enabling the computer's external display
W
P
E
NOTE: The COMPUTER 1 IN connector
supports Plug & Play (DDC2).
Audio cable (not supplied)
VGA signal cable (supplied)
To mini D-Sub 15-pin connector on the
projector. It is recommended that you use
a commercially available distribution am-
plifier if connecting a signal cable longer
than the one supplied.
NOTE: The NP3150/NP2150/NP1150/NP3151W is not compatible with video decoded outputs of either the NEC ISS-6020 and
ISS-6010 switchers.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ button on the remote control or the AUTO ADJUST button on
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
the projector cabinet.
* When noise appears on the sides of the screen:
Use the Overscan feature to display the image correctly.
Be sure to change the Overscan to 0% before pressing the AUTO ADJ or AUTO ADJUST button, otherwise an image may be
displayed with its sides cut off.
P
O P
USB(LAN)
O P
ER
PHONE
IBM VGA or Compatibles (Notebook
type) or Macintosh (Notebook type)
2. Installation and Connections
ER
BNC X 5 cable (not supplied)
Audio
cable (not
supplied)
NOTE: For older Macintosh, use a commercially
available pin adapter (not supplied) to connect to
your Mac's video port.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np2150Np3151wNp1150

Table of Contents