NEC NP3150 User Manual page 93

SOURCE NAME:
Enter a signal name. Up to 18 alphanumeric characters can be used.
INPUT TERMINAL:
Change the input terminal.
LOCK:
Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. After executing [LOCK],
the changes cannot be saved.
SKIP:
Set so that the selected signal will be skipped during auto search.
When complete, select OK and press ENTER. To exit without storing the setting, select Cancel. Select
[SOURCE NAME] and press ENTER to display the Source Name Edit window. You can change source
name on this window. Press
characters.
ALL DELETE ........... This feature enables you to delete all the registered signals in the Entry List.
PAGE UP/ PAGE DOWN... Enables you to go to the next page or the previous page.
P
P ER
NOTE: When all the signals in the [ENTRY LIST] are deleted, the currently projected signal will be also deleted except locked sig-
nals.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
to display the software keyboard, which you can enter alphanumeric
E E R
E R E
6. Using On-Screen Menu
78